Arduino Micro Italy 정품

OVERVIEW
The Micro is a microcontroller board based on the ATmega32U4 (datasheet),
developed in conjunction with Adafruit. It has 20 digital input/output pins
(of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection,
an ICSP header, and a reset button. It contains everything needed to support the microcontroller;
simply connect it to a computer with a micro USB cable to get started.
It has a form factor that enables it to be easily placed on a breadboard.

The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in
USB communication, eliminating the need for a secondary processor.
This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.
It also has other implications for the behavior of the board; these are detailed on the getting started page.

You can find here your board warranty informations.

Getting Started
You can find in the Getting Started section all the information you need to configure your board,
use the Arduino Software (IDE), and start tinker with coding and electronics.

Need Help?
On the Software on the Arduino Forum
On Projects on the Arduino Forum
On the Product itself through our Customer Support

TECH SPECS
Microcontroller: ATmega32u4
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 20
PWM Channels: 7
Analog Input Channels: 12
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB (ATmega32u4) of which 4 KB used by bootloader
SRAM: 2.5KB (ATmega32u4)
EEPROM: 1KB (ATmega32u4)
Clock Speed: 16 MHz

DOCUMENTATION
https://store.arduino.cc/usa/arduino-micro