판매가 | 25000 |
---|---|
할인판매가 | 25,000원 (25,000원 할인) |
할인금액 | 총 할인금액 원 (모바일할인금액 원) |
적립금 |
250원(1.00%) 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % |
배송방법 | 택배 |
배송비 | 3,500원 (150,000원 이상 구매 시 무료) |
배송 | |
---|---|
수량 |
상품 정보 | 가격 | 삭제 |
---|---|---|
총상품금액(수량) 0 |
상품명 | [Adafruit-A385] DHT22 temperature-humidity sensor + extras |
---|---|
판매가 | 25,000원 |
제조사 | Adafruit |
원산지 | 해외 |
적립금 | 250원 (1%) |
상품코드 | P000BADL |
배송방법 | 택배 |
배송비 | 3,500원 (150,000원 이상 구매 시 무료) |
수량 |
*Adafruit 제품은 해외배송 입니다
배송기간 이 약 2주 소요 됩니다
해외배송 제품은 주문 후 취소가 불가능 합니다
교환,반품,기술지원 이 불가능 합니다
구매전 이점 꼭 확인해 주세요*
The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.
Simply connect the first pin on the left to 3-5V power, the second pin to your data input pin and the right most pin to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin! We have written an Arduino library with example code
Compared to the DHT11, this sensor is more precise, more accurate and works in a bigger range of temperature/humidity, but its larger and more expensive
Comes with a 4.7K - 10K resistor, which you will want to use as a pullup from the data pin to VCC.
Downloads: