Arduino Wireless SD Shield Italy 정품

OVERVIEW
The Wireless SD shield allows an Arduino board to communicate wirelessly using a wireless module.
It is based on the Xbee modules from Digi, but can use any module with the same footprint.
The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight).
It can be used as a serial/usb replacement or you can put it into a command mode and configure it
for a variety of broadcast and mesh networking options.
The shields breaks out each of the Xbee's pins to a through-hole solder pad.

Included on board is a SD card slot. When using the SD Library to access the card,
Pin 4 is CS and cannot be used otherwise. SPI also relies on pins 11, 12, and 13 for communication.
 
An on-board switch allows the wireless module to communicate with the USB-to-serial
converter or with the microntroller.

Getting Started
You can find in the Getting Started section all the information you need to configure your
board, use the Arduino Software (IDE), and start tinker with coding and electronics.

Need Help?
On the Software on the Arduino Forum
On Projects on the Arduino Forum
On the Product itself through our Customer Support

DOCUMENTATION
https://store.arduino.cc/usa/arduino-wirelss-sd-shield