Arduino Due Italy 정품 (탈부착 가능 플라스틱 Bottom 포함)
OVERVIEW
The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU.
It is the first Arduino board based on a 32-bit ARM core microcontroller.
It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs,
4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC
(digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and
an erase button.
Warning: Unlike most Arduino boards, the Arduino Due board runs at 3.3V.
The maximum voltage that the I/O pins can tolerate is 3.3V.
Applying voltages higher than 3.3V to any I/O pin could damage the board.
The board contains everything needed to support the microcontroller; simply connect it to
a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started.
The Due is compatible with all Arduino shields that work at 3.3V and are compliant
with the 1.0 Arduino pinout.
The Due follows the 1.0 pinout:
TWI: SDA and SCL pins that are near to the AREF pin.
IOREF: allows an attached shield with the proper configuration to adapt to the voltage
provided by the board. This enables shield compatibility with a 3.3V board like the Due
and AVR-based boards which operate at 5V.
An unconnected pin, reserved for future use.
You can find your board warranty information here.
Getting Started
You can find in the Getting Started section all the information you need to configure your
board, use the Arduino Software (IDE), and start tinker with coding and electronics.
Need Help?
On the Software on the Arduino Forum
On Projects on the Arduino Forum
On the Product itself through our Customer Support
This board is supplied with headers soldered. You can find the board without headers at this link
TECH SPECS
Microcontroller: AT91SAM3X8E
Operating Voltage: 3.3V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-16V
Digital I/O Pins: 54 (of which 12 provide PWM output)
Analog Input Pins: 12
Analog Output Pins: 2 (DAC)
Total DC Output Current on all I/O lines: 130 mA
DC Current for 3.3V Pin: 800 mA
DC Current for 5V Pin: 800 mA
Flash Memory: 512 KB all available for the user applications
SRAM: 96 KB (two banks: 64KB and 32KB)
Clock Speed: 84 MHz
Length: 101.52 mm
Width: 53.3 mm
Weight: 36 g
DOCUMENTATION
https://store.arduino.cc/usa/arduino-due